Designer Series| Series 548


Series 548 High Performance hinged doors can be configured as single or double doors. When used in a double door application, a true rebated meeting style is used for a flush appearance. Doors are designed to accept high quality architectural hardware and glass thicknesses up to 20mm.
BAL40 Testing Certified WERS Ratings

The table below lists some of the WERS rated glass and frame combinations for this system. For a complete list of all rated glass and frame combinations refer to the Series 548 WERS Data Sheet.

Glass Description COOLING HEATING Uw SHGCw Tvw Inf
5mm Clear 29% 15% 6.0 0.57 0.58 0.80
5mm Grey 40% 8% 6.0 0.42 0.32 0.80
6.38mm Comfort Plus 52% 23% 4.5 0.35 0.38 0.80
4Az/10Gap/4EA 60% 28% 3.8 0.28 0.40 0.80
4/10Ar/4EA 48% 41% 3.6 0.48 0.48 0.80

Maximum Panel Height* 2350mm
Maximum Panel Width* 900mm
Maximum Glass Thickness ≤ 20mm

AS2047 Testing CertifiedAS2047 Testing Certified

* Subject to individual site conditions and wind loads. Contact us for more information, e-mail

    Key Features

    • Successfully tested for compliance with AS 2047.
    • The Vantage Series 548 Hinged door has been successfully tested to keep water out.
    • Open out door will resist up to 300Pa of water. Open in door will resist up to 200Pa of water.
    • Doors are hinged off a heavy duty double tubular jamb with thickened webs where hinges are attached.
    • Rebated door stiles give a flush appearance when the two doors meet and provide superior weather protection.
    • Door sections suit high quality hardware and are capable of supporting the glass without sagging.
    • Parliament hinges allow external swing doors to be opened up 180º back against the wall.
    • Concealed lock keeper specially designed to fit in the cavity on the leading edge of the ”lazy side• door and eliminates unsightly holes milled in the aluminium for latch and lock bolt.
    • The heavy duty door panels are capable of carrying 20mm insulating glass.
  • Murwillumbah
  • 28-32 Buchanan Street,
  • Murwillumbah NSW 2484
  • P: (02) 6672 7239
  • Copyright 2013 window makers.
  • All rights reserved.