High Performance SlideMASTERâ„¢ Sliding Door| Series 704


The Series 704 is a high performance internal sliding commercial door offering up to 4 panels in each direction.
BAL40 Testing Certified WERS Ratings
The table below lists some of the WERS rated glass and frame combinations for this system. For a complete list of all rated glass and frame combinations refer to the Series 453 WERS Data Sheet.
Single Glazed
Glass Description Uw SHGCw Tvw Inf
6EVanClr 4.62 0.50 0.52 1.12
6EVanSpB 4.62 0.29 0.30 1.12
4/10Ar/4ET 3.28 0.56 0.58 1.12
6.38LamSpGy/12Ar/6 3.88 0.20 0.09 1.12

Maximum Panel Height* 3000mm
Maximum Panel Width* 2500mm
Maximum Glass Thickness ≤ 24mm

* Subject to individual site conditions and wind loads. Contact us for more information, e-mail techsupport@windowmaker.com.au

    Key Features

    • This high performance sliding door has been tested for compliance with the relevant Australian Standards. Achieved a very high water resistance of 450Pa.
    • The extra strong multi-hollow meeting stiles allow large sliding doors to be fabricated in high wind load areas.
    • There are a large variety of door combinations possible: XF, FX, FXF, FXXF, XXF, FX and FXXXXF. 90° corner units FX^XF and FXX^XXF also available.
    • The door is compatible with the high performance Series 406 606 (single glazed) and 426 / 626 (double glazed) FrontGLAZE™ framing. The head and jamb sections have an additional weather leg to ensure that junctions between doors and fixed sidelights/highlights maintain the high water resistance.
    • Doors can be fitted with surface mounted deadlock, mortice lock or multi point mortice lock.
    • Doors run on heavy duty double bogey wheel carriages. The key to silent running door is to match the wheel diameter to the running track. This shares the dead load across the track. This is why our doors slide smooth and quiet. If required the height of the wheel can be adjusted from the edge of the panel with a standard ‘Phillips’ screw driver.
    • Variety of bottom rail and mid rail sizes available. The tall square bottom rail is standard and illustrated on back page.
    • Custom aluminium sub-sills with built-in anti blow-back drainage hole cover flap are always fitted under SlideMASTER™ sliding doors.
    • Door panels will accept glass up to 13.52mm thick single glazed or 20mm and 24mm double glazed IGU’s using special rails and stiles.
    • Thresholds and snap-in flat filler ensure that the clean looks are maintained.
    • Can also be fitted with concealed roller screens or sliding fly doors. Both systems are illustrated on back page.
  • Murwillumbah
  • 28-32 Buchanan Street,
  • Murwillumbah NSW 2484
  • P: (02) 6672 7239
  • Copyright 2013 window makers.
  • All rights reserved.